User Manual

- 408 -
7.25 Domain Name Server Relay Commands
7.25.1 Show Commands
7.25.1.1 show hosts
This command displays the static host name-to-address mapping table.
Syntax
show hosts
Default Setting
None
Command Mode
Privileged Exec
Display Message
Domain Name List: Domain Name.
IP Address: IPv4 or IPv6 address of the Host.
7.25.1.2 show dns
This command displays the configuration of the DNS server.
Syntax
show dns
Default Setting
None
Command Mode
Privileged Exec
Display Message
Domain Lookup Status: Enable or disable the IP Domain Naming System (DNS)-based host
name-to-address translation function.
Default Domain Name: The default domain name that will be used for querying the IP address of a
host.
Domain Name List: A list of domain names that will be used for querying the IP address of a host.
Name Server List: A list of domain name servers, including IPv4 and IPv6.
Request: Number of the DNS query packets been sent.