User Manual

- 454 -
no area virtual-link authentication command configures the default authentication type for the OSPF
virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID of
the neighbor.
Syntax
area <areaid> virtual-link <neighbor> authentication {none | {simple <key>} | {encrypt <key> <keyid>}}
no area <areaid> virtual-link <neighbor> authentication
Default Setting
None
Command Mode
Router OSPF Config Mode
8.3.2.18 area virtual-link dead-interval
area virtual-link dead-interval command configures the dead interval for the OSPF virtual interface on
the virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID
of the neighbor. The range for seconds is 1 to 65535. no area virtual-link dead-interval command
configures the default dead interval for the OSPF virtual interface on the virtual interface identified by
<areaid> and <neighbor>. The <neighbor> parameter is the Router ID of the neighbor
Syntax
area <areaid> virtual-link <neighbor> dead-interval <seconds>
no area <areaid> virtual-link <neighbor> dead-interval
Default Setting
40
Command Mode
Router OSPF Config Mode
8.3.2.19 area virtual-link hello-interval
area virtual-link hello-interval command configures the hello interval for the OSPF virtual interface on
the virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID
of the neighbor. The range for <seconds> is 1 to 65535. no area virtual-link hello-interval command
configures the default hello interval for the OSPF virtual interface on the virtual interface identified by
<areaid> and <neighbor>. The <neighbor> parameter is the Router ID of the neighbor
Syntax
area <areaid> virtual-link <neighbor> hello-interval <1-65535>
no area <areaid> virtual-link <neighbor> hello-interval