User Manual

- 523 -
9.5.2.3 ip pimdm hello-interval
This command configures the transmission frequency of hello messages between PIM enabled
neighbors. This field has a range of 10 to 3600 seconds.
Syntax
ip pimdm hello-interval <10 - 3600>
no ip pimdm hello-interval
<10 - 3600> - This is time interval in seconds.
no - This command resets the transmission frequency of hello messages between PIM enabled
neighbors to the default value.
Default Setting
30
Command Mode
Interface Config
9.6 Protocol Independent Multicast – Sparse Mode (PIM-SM) Commands
9.6.1 Show Commands
9.6.1.1 show ip pimsm
This command displays the system-wide information for PIM-SM.
Syntax
show ip pimsm
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Admin Mode: This field indicates whether PIM-SM is enabled or disabled. This is a configured
value.
Data Threshold Rate (Kbps): This field shows the data threshold rate for the PIM-SM router. This is
a configured value.