User Manual

- 57 -

example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes. In an

SVL system, the MAC address will be displayed as 6 bytes. Note: This software version only

supports IVL systems.

VLAN ID: The vlan id of that mac address.

Status: The status of this entry.

The meanings of the values are:

Static: The value of the corresponding instance was added by the system or a user when a

static MAC filter was defined. It cannot be relearned.

Learned: The value of the corresponding instance was learned by observing the source MAC

addresses of incoming traffic, and is currently in use.

Management: The value of the corresponding instance (system MAC address) is also the value

of an existing instance of dot1dStaticAddress. It is identified with interface 3/1 and is currently

used when enabling VLANs for routing.

Self: The value of the corresponding instance is the address of one of the switch’s physical

interfaces (the system’s own MAC address).

GMRP Learned: The value of the corresponding instance was learned via GMRP and applies to

Multicast.

Other: The value of the corresponding instance does not fall into one of the other categories.

7.2.2.4 show mac-addr-table vlan

This command displays the forwarding database entries. The user can search FDB table by using vlan

id.

Syntax

show mac-addr-table vlan <vlanid>

<vlanid> - VLAN ID (Range: 1 – 3965)

Default Setting

None

Command Mode

Privileged Exec

Display Message

Mac Address: A unicast MAC address for which the switch has forwarding and/or filtering

information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for