User Manual

- 888 -
Selection Criteria
Global or Link-local Next-hop - Specify if the Next Hop IPv6 Address is a Global IPv6 Address or a
Link-local IPv6 Address.
Slot/Port - Enter the unit, slot and port number for the Link-local IPv6 Next Hop Address. This field is
displayed only if the Global or Link-local Next-hop Selector is selected as Link-local.
Configurable Data
IPv6 Network Prefix/PrefixLength - Enter an IPv6 Network Address with Prefix Length.
Next Hop IPv6 Address - Enter an IPv6 Next Hop Address. If the Next Hop IPv6 Address specified
is a Link-local IPv6 Address, specify the Slot/Port for the Link-local IPv6 Next Hop Address.
Preference - Enter a Preference Value for the given route.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
Cancel - Discards the changes made on the page and navigates back to the referring page.
11.6.8.2 Viewing IPv6 Route Table Information Page
Selection Criteria
Routes Displayed -
 Configured Routes - Shows the routes configured by the user
 Best Routes - Shows only the best active routes
 All Routes - Shows all active IPv6 routes
Non-Configurable Data
Number of Routes/Best Routes - Displays the total number of active routes/best routes in the route
table.
IPv6 Prefix/Prefix Length - Displays the Network Prefix and Prefix Length for the Active Route.
Protocol - Displays the Type of Protocol for the Active Route.
Next Hop Slot/Port - Displays the Interface over which the Route is Active.