Manualshelf

Installation Guide

ManualsBrandsFortress Building Products ManualsBuilding SuppliesAthens Flat Top and Bottom Design 4-ft H x 4-ft W Gloss Black Aluminum Fence Gate
123456
Table Of Contents
Fill Post Holes with Concrete Continue Post and Panel Installation
• The installation process requires posts and panels to move freely with in the post hole.
• After installing two panels go back to the first post and fill with concrete.
• Use a level to confirm that posts are straight. If required posts can be staked while concrete sets.
• Depending on your fence layout, the last panel in each run might need to be cut to length.
Concrete
Cut Panel
Fill Post Holes with Concrete
• Continue filing post holes with concrete as posts and panels are installed.
• Use a level to confirm that posts are straight. If required posts can be staked while concrete sets.
• Allow concrete to cure for a minimum of 24 hours before using gates.