Installation Guide

8
FENCING INSTALLATION: VERSAI
Step 2: Use Stakes & String to Create Perimeter
  
  
  
  
each fence run, and layout the perimeter of the fence
  
  Layout fence so that minimal panel cuts are required;
  
  
  
Note:
• (2” [50mm] Post Max On Center Spacing is
92-3/8” [2346mm]).
Fig.1
Step 3: Dig Post Holes
  
   
 

  
Note:
   
 
• Post holes should be at least  in diameter,
  
  
XXX
X
X
X
XXXX
X
XX
X
XX
Stake
Start 2
Cut
Panel
Start 4Start 3
Cut
Panel
Stake
Start 1
House