User's Manual

ES2440 Hardware Guide: LEDs and Button Operation
10
Chapter 3
LEDs and Button Operation
3.1 Front-Panel LED Indicators
The ES2440 Mesh Point features nine LEDs on the front panel
(shown in Figure 2.1).
Power can exhibit:
 solid green - Mesh Point is powered on and operating
normally.
 off - Mesh Point is powered off.
 slow-flash green - Mesh Point is booting.
Status can exhibit:
 intermittent green - Cleartext is passing on an encrypted
port.
Ethernet1 , Ethernet2 , Ethernet3 can exhibit:
 solid green - Link has been established.
 intermittent green - Traffic is passing on the port.
Radio1 , Radio2 , Radio3 and Radio4 can exhibit:
 solid green - Radio is on.
 intermittent green - Radio is passing traffic.
 off - Radio is off or Mesh Point’s RF Kill function is enabled.
color behavior
Power Status
Ethernet1,
Ethernet2,
Ethernet3
Link/Act
Radio1, Radio2,
Radio3, Radio4
green
solid normal operation - link established radio ON
slow flash booting - - -
intermittent -
cleartext on
encrypted port
passing traffic passing traffic
off powered OFF - -
radio OFF
or
RF Kill enabled
QA review draft1