User's Manual

ES2440 Hardware Guide: LEDs and Button Operation
11
3.2 Recessed Button Operation
The single recessed button on the ES2440 front panel (shown
in Figure 2.1) returns the ES2440 Mesh Point to the factory
default configuration.
The button is covered by a screw cap that you must remove, in
order to access the button. You must replace the screw cap,
in order to maintain the watertight integrity of the ES2440
chassis.
To restore default settings, depress and hold the button for 10
seconds. All current configuration information on the running
boot partition will be lost.
QA review draft1