User's Manual

ES2440 Hardware Guide
i
009-00045-00r1
Fortress ES2440 High-Capacity Infrastructure Mesh Point [rev.1]
Copyright © 2011 Fortress Technologies, Inc. All rights reserved.
This document contains proprietary information protected by copyright. No part of this
document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, without written permission of Fortress Technologies, 2 Technology Park Drive,
Westford, MA 01886-3140, except as specified in the Product Warranty and License
Terms.
FORTRESS TECHNOLOGIES, INC., MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS MATERIAL, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
FORTRESS TECHNOLOGIES, INC. SHALL NOT BE LIABLE FOR ERRORS
CONTAINED HEREIN OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH THE FURNISHING, PERFORMANCE OR USE OF THIS
MATERIAL. THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE
WITHOUT NOTICE.
The Fortress Technologies and AirFortress logos and AirFortress and are registered
trademarks; Multi-Factor Authentication, Unified Security Model, Wireless Link Layer
Security and Three Factor Authentication (TFA) are trademarks of Fortress Technologies,
Inc. The technology behind Wireless Link Layer Security™ enjoys U.S. and international
patent protection under patent number 5,757,924.
All trademarks mentioned in this document are the property of their respective owners.
IMPORTANT SAFETY INFORMATION
The ES2440 is an outdoor device. It should be powered by PoE (Power over Ethernet) using a
weatherized Ethernet cable. A mid-span PoE injector is provided with the ES2440. This mid-span
PoE injector, as well as the power supply/adapter used to power that injector, should remain
indoors, protected from the weather. From the mid-span PoE injector, a weatherized Ethernet
cable should be run to the outdoor ES2440. In this way, power can be safely provided to the
outdoor ES2440 while the power supply and injector remain protected indoors, as shown:
The power port on the ES2440 should not be used; it is reserved for future expansion.
Weatherized Ethernet
Cable
PoE Midspan
Injector
ES2440
Wall
Outlet
Ethernet
QA review draft1