User's Manual

ES2440 Hardware Guide: Specifications
13
4.1.3 Compliance and Standards
The Fortress ES2440 is certified by the Wi-Fi Alliance® for the
following standards:
4.2 RJ45-to-DB9 Serial Port Adapter
An RJ45-to-DB9 adapter (included with each Mesh Point) is
required in order to connect the Mesh Point’s serial port to a
DB9 terminal connection.
Figure 4.1 shows the pin numbers for the two connectors. With
the RJ45 connector facing you and oriented with the tab
receptacle up, pins are numbered from right to left, as shown.
With the DB9 connector facing you and oriented with the wide
side up, pins are numbered from right to left, top to bottom.
Figure 4.1. RJ45 and DB9 Pin Numbering
Table 4.1 shows the serial port adapter pin-outs.
emissions/immunity:
CE, FCC, ETSI, CB Test,
MIL-STD 464A, MIL-STD 461F
vibration:
MIL-STD 810G
weather resistance:
IP67 submersible
IEEE:
802.11a/b/g/n
security:
WPA™, WPA2™—Personal and Enterprise
EAP types:
EAP-TLS, EAP-TTLS/MSCHAPv2,
PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC,
EAP-SIM, EAP-AKA, EAP-FAST
RJ45 DB9
...5 1
female pins
9
6...
pins 8 1
Table 4.1. RJ45-to-DBP Adapter Pin-Outs
RJ45 pin DB9 pin standard color
1 8 grey
26brown
32yellow
4 5 green
5-red
6 3 black
QA review draft1