User Guide

Bridge GUI Guide: Administrative Access
37
3 Click APPLY in the upper right of the screen (or CANCEL the
conversion of the account).
The newly converted account will be listed, in Advanced View,
on
Configure -> Administration with Learned state of No, and the
associated administrator will be allowed to log on (with valid
credentials).
Learned user names and passwords need not meet the
Bridge’s configured requirements for local administrative
accounts.
NOTE: If an ac-
count is the only
Enabled Administrator-
level account present,
you cannot change its
Administrative State to
Disabled or reconfigure
its Role.
2.2.2.9 Editing Administrative Accounts
You can reconfigure any setting for an individual administrative
account except for the
Username.
1 Log on to the Bridge GUI through an Administrator-level
account and select
ADVANCED VIEW in the upper right corner
of the page, then
Configure -> Administration from the menu
on the left.
2 In the Administrator Settings frame, click the EDIT button to
the left of the account you want to edit.
3 On the resulting Administration screen, enter new values for
those settings you want to configure. (Your options are
described in detail in sections 2.2.2.2 through 2.2.2.7.)
NOTE: Changes to
the account you
are currently logged
onto will take effect the
next time you log on.
4 Click APPLY in the upper right of the screen (or CANCEL your
changes).
Global administrative account logon behaviors and password
requirements can be edited through
Configure -> Security, as
described in Section 2.2.1.
2.2.2.10 Deleting Administrative Accounts
You can delete any account in the Advanced View
Administrator
Settings
frame (Configure -> Administration), except for:
 the preconfigured accounts: admin, logviewer and
maintenance
 any account, if it is the only Administrator-level account with
an
Administrative State of Enabled present on the Bridge
At least one account with the
Role of Administrator (refer to
Section 2.2.2.3) must always be present and enabled on the
Bridge.
1 Log on to the Bridge GUI through an Administrator-level
account and select
ADVANCED VIEW in the upper right corner
of the page, then
Configure -> Administration from the menu
on the left.
2 In the Administrator Settings frame, click to place a check in
the box(es) to the left of the account(s) you want to
eliminate.
3 Click DELETE in the upper left of the frame.