User Guide

ES820 Bridge: Hardware
1
1 Port Locations
The ES820 Bridge’s power inlet, input/output control connector,
and antenna ports are located on the back panel, shown below.
Figure 1 ES820 Back-Panel Port Locations
2LED Indicators
The ES820 Bridge’s front panel features six system LEDs.
Figure 2 ES820 Front-Panel Power Control and LEDs
Power
can exhibit:
solid green - Bridge is powered on and operating normally.
off - Bridge is powered off.
slow-flash green - Bridge is booting.
Status
can exhibit:
intermittent green - Cleartext is passing on an encrypted
port.
Ethernet1
and
Ethernet2
can exhibit:
solid green - Link has been established.
intermittent green - Traffic is passing on the port.
antenna port Radio 1
antenna port Radio 2
DC power inlet
I/O control connector
Radio 2
Radio 1
Ethernet port 1
Ethernet port 2
Status
Power
Power On/Off
LEDs