Installation Guide

16 © 2019 Fortress Framing, LLC Rev6-10/10/19
S-Ledger Installaon
Insert a Ledger Bracket through the back side of the S-Ledger at
every 12" O.C. or 16" O.C. interval depending on your joist spacing requirements.
Place all the Ledger Brackets in the pre-punched slots in the S-Ledger.
INSTALLATION ALERT: ALL ledger brackets MUST be inserted
into the S-Ledger prior to aaching it to the structure.
Note: Ledger Bracket has a notch that
makes joist installaon easier. This
notch should point down towards the
ground
S-Ledger
Notch
Ledger Bracket
No fasteners are required to hold the Ledger Brackets into the S-Ledger. Once the S-Ledger is aached
to the structure, the Ledger Brackets will be held solidly in place.