Installation Guide
6   © 2019 Fortress Framing, LLC   Rev6-10/10/19                         
Fortress Framing includes span charts within these instrucons. Never exceed the limits outlined within the 
span charts. Doing so may void the manufacturer's warranty. If there are quesons, consult a professional 
engineer, building code ocial, your local dealer, or Fortress Faming. 
Fortress Framing includes a fastening schedule within these instrucons. Reference the Table of Contents. In 
most cases, Evoluon parts are manufactured with pre-drilled holes in the brackets. ALL of these holes must be 
lled with the Evoluon #10 3/4" Black Self-Tapping Screw (NOT including the Ledger, reference the S-Ledger 
secon for fastening instrucons). 
IMPORTANT INFORMATION 
Personal Protecon Equipment (PPE) must be worn anyme you're using power tools and working with  
Evoluon Steel Deck Framing. Eye protecon, hearing protecon, closed-toe shoes, gloves, long sleeves, and 
pants must be worn to keep yourself safe. 
As the steel framing parts are cut, all metal shavings and/or chips must be removed from inside the Evoluon 
Framing parts. At the end of a work period, all steel shavings and/or chips must be cleaned o the jobsite. Not 
doing so could result in the staining of surrounding surfaces. 
As the steel framing parts are cut, DO NOT allow metal shavings and/or chips to get dropped or blown into a 
pool, hot tub, or any other body of water. Staining could occur if this were to happen. 
Fortress Framing does not cover all possible installaon scenarios within these instrucons. In some cases, it 
may be necessary for you to consult a professional engineer, building code ocial, or local dealer. In addion, it 
may become necessary to use brackets other than Fortress’ when more complex installaons take place. 
It is the responsibility of the installer to meet all code and safety requirements, and to obtain all 
required building permits. The framing, deck and railing installer should determine and implement 
appropriate installaon techniques for each installaon situaon. Neither The Fortress Company nor 
its distributors shall not be held liable for improper or unsafe installaons. 










