Installation Guide

12
EVOLUTION
TM
STEEL DECK FRAMING
Clean Cut Areas
  
  
3. Make sure surfaces to be painted are clean. DO NOT cut
  
  

• DO NOT
 
• Be sure to remove metal shavings and/or chips
inside the cut material. Not doing so may result in rust
 
Fig. 7
Apply Spray Paint To Cut Areas
1. Using a piece of cardboard as a mask, apply the 1
st
coat of
Fortress zinc based touch-up paint.
  
3. Apply the 2
nd
coat of Fortress zinc based touch-up paint.
  
Fig. 6