Installation Guide
22
EVOLUTION
TM
STEEL DECK FRAMING
End Joists To S-Ledger & Beam
1. If required, cut joists to desired length.
3. fasten End Joists
onto F-50 Brackets
. Adjust if
needed.
use either 12”
to
mount joists onto Beam
6. If using non-standard spacing , Use F-10
Brackets to mount joists onto Beam.
Fig. 40.
the joist in place of the Ledger Bracket.
Be sure
As
• Fortress recommends using the
3-4-5 rule. Measure and mark 3’ [914mm] from the edge
of Beam, measure and mark 4’ [1219mm] from outer
more accurate results.