Installation Guide

12
DECKING INSTALLATION : INFINITY I-SERIES®


• BoardscanbefastenedusingTopFixingScrewsincertain
  circumstances,parcularlyiftheboardshavebeenripped.
• Asingle,longitudinallineoffastenersissuscepbleto
  pivongandmaybecomeahazard.
• Allboardsrequiretwofastenersateveryjoist.Either two
 HULKclips,aHULKclipandaCompositeScrewortwo
  CompositeScrewstobeadequatelyfastenedtotheframe.
AsshowninFig.1.
• Alltopxingscrewsshouldbeposioned
1-3/16”[30mm]fromtheedgeoftheboard.

Final Product
Rip Cut
Incorrect
Correct


CORRECTINCORRECT


Topxedscrewsshouldbe
located13/16”inwardfromboard
edge.Thisensuresscrewslineupwith
acavityintheprole.Neverfasten
throughthe“feet”oftheI-Series
prole.
 Ripsorlengthwisecutsshouldavoidthewebor“feet”ofthe
board.Fig.2illustratesvariouswaysaboardcanberippedand
securelyfastenedsoastopreservetheintegrityofyourdeck.