Installation Guide

INFINITY TECHNICAL GUIDE
[e-mail]
www.FortressDeck.com
1-844-909-4999
17/27 063016
11.4 Installation: Post
●FortressInnityPostSleevesaremanufacturedtoworkwithtreated
4”x4” post. (Actual dimention 3.5” x 3.5”)
●CONSULT LOCAL BUILDING CODES REGARDING PROPER
POST INSTALLATION PRACTICES AND MINIMUM RAILING
HEIGHTS IN YOUR AREA.
●CutFortressInnityPostSleevestothedesiredheight.
●Slidepostsleevesovertreated4”x4”postsdowntothedecking
surface.
●Postsshouldbesquareandplumbinbothdirections.
●Oncepostsleevesareinstalled,verifyspacingbetweenpostsbefore
precedingtorailinginstallation.
11.5 Installation: Modern Rail Straight and Miter/Angle
●Measuretheopeningfrominsideofposttoinsideofpostanddeterminedesiredangleandlengths.(11.5A)
●TransfertheangleandmeasurementstotheInnityModernRails,placetopandbottomrailssidebysidetoensureuniform
spacingbetweenposts.Markrailsandcuttodesiredlengthandangle.(11.5B)
11.5A 11.B