Operation Manual



OPERATION INSTRUCTION
Cooling Operation
x Remove the water tank.
x Put the frozen crystals into the water tank.
x Add clean water into the water tank and ensure the water level is between the “Min” and the “Max”
level.
x Press the ON/SPEED button to turn on the appliance.
x Press the COOLER button for cooling operation.
Speed
x Press the ON/SPEED button to select fan speed and the corresponding indicator will be on:
: High
: Medium
: Low
Oscillation
x Press the LEFT/RIGHT button to activate horizontal oscillation. The indicator will be on.
x Press the UP/DOWN button to activate airflow vertical oscillation. The indicator
will be on.
Timer
x Press the TIMER button to activate auto-off timer with 1/2/4/8 hour selection and the corresponding
indicator will be on.
Mode
x Press the MODE button to select Normal, Natural or Sleep mode.
Normal Mode: the appliance will be operating by selected speed and the indicator
will be on.
Natural Mode: the appliance simulates the wind in the natural environment. It will be operated from high
speed to low speed and goes on circularly. The indicator will be on.
Sleep Mode: the speed will be dropped on level in very half hour until it reaches the lowest speed. The
indicator will be on.
Notes: Ensure the water tank is not empty when the appliance is running in cooling operation.