Use and Care Manual

ManualsBrandsFortress ManualsBuilding materials6 ft. x 29 in. Drywall Scaffold Guard Rail Set

Multifunction Rolling Scaold

Towers 6’, 12’ and 18’

OPERATING INSTRUCTIONS

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

This manual provides important information on proper operation and maintenance. Every eort has been

made to ensure the accuracy of this manual. We reserve the right to change this product at any time without

prior notice.

STOP! CONTACT CUSTOMER SERVICE WITH QUESTIONS OR PROBLEMS.

If you experience a problem or need parts for this product, please call Fortress Industries customer service at

800-980-8841.

Phone # 800-980-8841 | Fax # 909-627-8211 | info@fortressindustriesinc.com | www.fortressindustriesinc.com

Mailing Address: 12403 Central Ave #188, Chino, CA 91710 | Physical Address: 4850 Murrieta Street, Chino, CA 91710

Summary of content (6 pages)

PAGE 1
OPERATING INSTRUCTIONS Multifunction Rolling Scaffold Towers 6’, 12’ and 18’ READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important information on proper operation and maintenance. Every effort has been made to ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice. STOP! CONTACT CUSTOMER SERVICE WITH QUESTIONS OR PROBLEMS.
PAGE 2
TABLE OF CONTENT General Product Specifications ............................................ Page 3 Features ........................................................................... Page 3 Package Contents .............................................................. Page 4 Safety Practices ................................................................. Page 5 Assembly of Multifunction Rolling Scaffold Tower ....................
PAGE 3
GENERAL PRODUCT SPECIFICATIONS Features Industrial steel provides a strong and sturdy structure 1,000 lb. Capacity Adjustable for stair applications Heavy duty 5 in. caster with a 1-½ in. wide wheel, steel yoke and double locking brake Platform adjusts from 1 ft. to 12 ft. in 2 in.
PAGE 4
MULTIFUNCTION ROLLING SCAFFOLD TOWER 18’ Multifunction Rolling Scaffold Tower: Package Contents (6) 6' Ladder Frames (6) 6' Truss (3) 6' x 29" Platforms (1) Complete Guard Panel Set with toe board attached (4) Wide outriggers (20) Snap pins (4) Toggle pins (8) 5” Casters 12’ Multifunction Rolling Scaffold Tower: Package Contents (4) 6' Ladder Frames (4) 6' Truss (2) 6' x 29" Platforms (1) Complete Guard Panel Set with toe board attached (4) Narrow outriggers (12) Snap pins (4) Toggle pins (8) 5” Casters 6
PAGE 5
WARNING AND SAFETY PRACTICES • Inspect scaﬀold daily or before each use. • Do not exert horizontal force from on top of a free standing scaﬀold. • When hoisting materials or using side brackets, scaﬀold must be retrained from tipping by guying or tying to a permanent structure or other acceptable means. • Do not use boxes, ladders, or other means to increase working heights. • Do not stand or sit on guard rails. • Do not climb or stand on cross brace or horizontal brace.
PAGE 6
Assembly of Multifunction Rolling Scaﬀold Towers 6’, 12’ and 18’ 1 Check all scaffold parts for damage, making sure that they are in proper working condition prior to assembly and erection of scaffold. Equipment that is damaged or is not in proper working condition should not be used. Frame Ladders 2 Attach (2) trusses to (2) ladder frame. Be sure spring activated locking pin is completely inserted into hole of ladder frame. All (4) locking pins should be in locked position on ladder frames.