Instructions / Assembly

10
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
4’[1219mm]opening
betweenStairPost
HOUSE/BUILDING
Fig. 1

Step 1: Sketch Railing Post Layout
1. Determinedesiredpostlocaons.Includestairpostsif 
 complengstairinstallaon.
2. Usingatapemeasure,determinetherequiredspacing
  betweeneachpost.Provided6’[1829mm]panel
maximumpostspacingis69-3/4”[1772mm].It is
  recommendedtolayoutposttoallowforminimalrailing 
 panelcuts.
 3. Foraacheddeckinstallaon,EndPostsclosesttowall
  shouldbeposioned4"[102mm]fromoutsidefaceof 
 S-Ledger.
 4. Sketchthedesiredpostlayout.
  
Note:
• AllPostsshouldbeposionedtoallowforeachpostbase
 throughbolttopenetratePostBlocking,JoistorU-Rim.
Referencedeckkitframinginstrucons.Adjustpost
  posioningifneeded.
• Openingbetweenstairpostsshouldbe4’[1219mm].
TOP VIEW
End
Post
Line
Post
Corner
Post
69-3/4”[1772mm]
maximumpostspacing