Instructions / Assembly

12
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
INSTALLATION: PICTURE FRAME DECK BOARDS
Step 1: Cut Square Edge Deck Boards Deck Boards to Length
1. on:Cutfoursquareedge 
 deckboardstodesiredlength.Measureedgetoedge
distance ofeachendofframe.Besurecutlengthsaccount
 for1/2"[13mm]overhangonbothendswhenmounted. 
 AsshowninFig.2&3.ReferenceTable1:gappingon
  page5toaccountforweathercondionimpactonboards.
2. on:Cutthreesquare
 edgedeckboardstodesiredlength.Measureedgetoedge
 distanceofeachendofframe.Besurecutlengthsaccount
 for1/2"[13mm]overhangonbothendswhenmounted. 
 AsshowninFig.2&3.ReferenceTable1:gappingon
  page5toaccountforweathercondionimpactonboards.
Note:
• Cutlengthsaresettosquareframe.
• Boardsshouldalwayshaveminimum1/8"[3mm]gapto 
structure.
• UseaWoodCungMiterSawtocutboards.
• Itisrecommendedtowearadustmaskwhencung.
Free-standingInstallaon
AachedInstallaon