Instructions / Assembly

13
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
Fig.2
Top View
Fig.3
Square Edge Deck Board
Desiredlength(x4)
Desiredlength(x3)
Referencegappingtableonpage5
Top View
Miter Cut Square Edge Deck Boards
1. on:Cutbothendsofall 
 fourboardsat45⁰angles.AsshowninFig.4.
2. on:Cutbothendsofthe 
board to be mountedasthefrontPictureFrameboard at a
 45⁰angle.AsshowninFig.5.
Cutoneendofeachboardtobemountedasthetwoside 
 PictureFrameboardsat45⁰angles.AsshowninFig.5.
Note:
• UseaWoodCungMiterSawtocutboards.
• Itisrecommendedtowearadustmaskwhencung.
Fig.4
Top View

Measureedgetoedgelength
Measureedgetoedgelength
Square Edge Deck Board
(x4)
45
o
45
o