Instructions / Assembly

18
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
Fig.13
Grooved Deck Board
DeterminedLength
Top View

1. PosionrstInllGroovedDeckBoardsothatithasequal
gappingatbothendsanda3/16"[5mm]gapbetween
frontPictureFrameBoardandInllGroovedDeckBoard.
AsshowninFig.14.
2. FacefastenrstInllGroovedDeckBoardalongitslength
onedgeclosesttofrontPictureFrameBoardusingHULK
MetalCompositeDeckscrews.AsshowninFig.14.
Fig.14
Top View
1-3/16”[30mm]fastener
spacingfromeachedge
Gappingis
temperature
dependent.
Reference
table 1 on
page5.
Front End on Deck
3/16”[5mm]gapping
betweenboardsides
16”[406mm] on center
spacingbetweenfasteners
Step 3: 
1. InsertHULKHiddenClipswithMetalScrewsintothe
exposedgrooveintherstGroovedDeckBoard.Posion
eachclipontothetopfaceofeachJoistorPictureFrame
Blocking.Besurethejaggededgeoftheclipisfacingthe
groovedboard.AsshowninFig.15&16.
2. FastenMetalScrewsonHULKHiddenClipsintojoistsor
PictureFrameBlocking.AsshowninFig.17.Besure
tokeepbothboardsengagedwiththeHULKHiddenClips
asyoufasten.