Instructions / Assembly

19
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
• HULKhiddenClipscrewshouldbedrivenintocavityofthe
  clipunltensionedagainstclipbody.DO NOToverdrive 
 screwpastthispoint.AsShownInFig.18.
 3. InsertthesecondcutInllGroovedBoardatanangle
  allowingittoengagewiththeexposedendoftheHULK
 HiddenClipswithMetalScrews.AsshowninFig.19.
 4. Whilepressingdown,pushthesecondBoardtowardsthe
  rstboardwithHULK HiddenClipsengagedwithboth
boards. AsshowninFig.20.Be sure gapping at ends of
  
board.
5. RepeatStep3:1-4unlthesecondtolastInllGrooved 
board.
Note:
• UseaWoodCungMiterSawtocutboards.
• Itisrecommendedtowearadustmaskwhencung.
Fig.15
Joist
Joist
Fig.16
Top View
Picture
Frame
Blocking
Joist
HULK Hidden
ClipwithMetal
Screw
Fig.17
InllBoard
1
PictureFrame
Board