Instructions / Assembly

23
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
 6. UseHULKMetalCompositeDeckScrewstofasteneach
  endofthedeckboardontotopfaceofstairframe.
  ReferenceFig.28&29forrecommendedfastenerspacing.
 7. Posionsecondcut SquareEdgeDeckBoardushwiththe
 sidefaceofthestairtrayandspaced1/8"[3mm]fromthe
 rstboard.AsshowninFig.30.
 8. RepeatStep1:3-6.AsshowninFig.31-35.
 9. RepeatStep1:1-8toinstallSquareEdgeDeckBoards 
onto remainingstepsinstairframe.AsshowninFig.36.
Note:
• Itisrecommendedtomark47-7/8”[1216mm] on Square
 EdgeDeckBoardpriortocung.Besuretocutalongthe 
 cutlinetopreventtolerancestackfrombladethickness,
  leavingthelastboardshort.Lengthofstairtreadisactually
  tobe47-7/8"[1216mm].
• Mounted SquareEdgeDeckBoardoverhangwillvary 
 basedonrise/runofstairframe.
Fig.23
Fig.24
Top View
47-7/8”[1216mm]
Square Edge Deck Board
Cutboardush
withbackofStair
Trayandcentered
acrossthewidth
oftheStairTray