Instructions / Assembly

29
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
INSTALLATION: Al
13
PLUS RAILING POSTS
Step 1: 
 1. PosionEnd,LineandCornerPostsindesiredposionon 
 decksurface.AsshowninFig.44or45.Forstair
  installaon,ONLY posionpoststobeusedattopofstair, 
 boomstairpostswillbemountedinlatersteps.
 2. Posiontheedgeofeachpostbaseplate1"[25mm]from 
 PictureFrameDeckBoardedges.AsshowninFig.46.
3. Conrmpostspacing.6’[1829mm]panelmaximumpost 
 spacingis69-3/4”[1772mm].AsshowninFig.47.DO NOT
 exceedthemaximumpostspacing.Adjustasneeded.
 4. Forwallmountedinstallaon,bothEndPostsshouldbe
  posioned3-7/8"[98mm]fromS-Ledger.Asshownin
  Fig.48.
Note:
• Referencedeckkitframinginstruconsforpostblocking
  posioning. 
through bolts should penetrate post blocking.
• Referencedeckkitframinginstruconsforpostblocking 
 instrucons.
Al
13
PLUS3"[76mm]
Postwithmounted
UB-04brackets