Instructions / Assembly

37
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
FOR A SUCCESSFUL INSTALLATION, IT IS REQUIRED TO MOUNT
STAIR BRACKETS BEFORE MOUNTING BOTTOM STAIR POSTS
Step 1: 
 1. Posiontheedgeoftheboompostbaseplate1/2" 
 [13mm]fromedgeofthestairframe.AsshowninFig.64.
 2. Posionwood2”x4”(actual1-1/2”x3-1/2”[38mmx 
 89mm])betweenposts.AsshowninFig.65.
 3. Posionboombracketcenteredatonpost&wood
2”x4”(actual1-1/2”x3-1/2”[38mmx89mm]). Use
  penciltomarktopedgeofbracketlocaononpost.As 
 showninFig.66.
 4. Disassemblethebracketbyremovingthebarrelandscrew.
  Referencethebracketassemblyonpage36.
 5. Placebracketbaseonprevioustopedgemark.Centerthe
  baseonthepostandusepenciltoaddmarksfortwo 
 screwholelocaons.AsshowninFig.66.
Note:
 • Besurebracketbaseiscenteredonpostwhenmarking 
 holelocaons.
Fig. 65
Fig. 66
Fig.67
Fig. 64
Top View
1/2"[13mm]
Oset