Instructions / Assembly

38
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
of Top Post 
 1. UseSpringPunchtomarktheholes. AsshowninFig.68.
 2. Drilloutbracketholewitha3/16”[5mm]drillbit.
AsshowninFig.69.
 3. UseT-25screwstoaachthebracketbasetothepost. 
AsshowninFig.70.
 4. Keepbracketbasecenteredasyouinstallsecondscrew.
 5. Insertthenghtenbarrel&screwtore-assemblebracket.
  AsshowninFig.71.
Tip:
• DependingontheversionoftheEvolveStairBracketused,
  thescrewholesmayneedtobepre-drilledwitha1/4” 
 [6mm]drillbit.
Fig. 68
Fig. 69
Fig. 70
Fig. 71