Instructions / Assembly

39
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
Step 3: Top Bracket of Top Post 
 1. Posionwood2”x4”(actual1-1/2”x3-1/2”[38mmx 
 89mm]) on stairs in line withboombrackets.Asshownin
 Fig.72.
 2. Placepanelontopofwood2”x4”[60mmx  
 102mm]nexttoboombrackets.AsshowninFig.73.
 3. Rakethepanelunlbalustersareparalleltotheposts.
 4. Clampthepaneltothepost.Besuretoclampatfour 
 touchpointstokeeppanelinposion.AsshowninFig.74.
 5. Posiontopbracketcenteredandatonpost.
 
of rail. As shown in Fig. 75.
 6. Usepenciltomarktopedgeofbracketlocaononpost.
 7. Disassemblethebracketbyremovingthebarrelandscrew.
 8. Placebracketbaseonprevioustopedgemark.  
 Centerthebaseonthepostandusepenciltoaddmarks 
 fortwoscrewholelocaons.AsshowninFig.76.
Note:
• Forbestresults,besurebracketbasesarecenteredon 
 postswhenmakingmarks.

Fig. 73