Instructions / Assembly

46
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
INSTALLATION: Al
13
PLUS STAIR RAILING PANEL
Step 1: Measure & Mark Panels Where Cuts Will Be Made
 1. Posionwood2”x4”(actual1-1/2”x3-1/2”[38mmx
 89mm])onstairsinlinewithboomandtopbrackets.
 2. Placethepanelontopofwood2”x4”(actual1-1/2”x
 3-1/2”[38mmx89mm])nexttoboombrackets.
 3. Havethepanelrakedandasclosetonalinstallaon
 posionaspossible.
 4. Conrmthatpanelislevel.
 5. Placecutmarkingonrailsinlinewiththebackofbracket
 opening.Besureboomofbracketandboomofrailare
 ush.AsshowninFig.90.
 6. Usespeedsquaretoensuremarkingsareperpendicularto
 panel.
AdjustableStairPanel
StairAngle
Maximum40
o