Instructions / Assembly

47
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
Cut & Clean Panel
 1. Cutpanelusingasawwithaferrousmetalcungblade.
 2. Useletosmoothcutedges.
 3. Removeanymetalshavingsanddustwithabrushorrag.
 4. Makesuresurfacestobepaintedareclean.
Tip:
 • Besuretoalsoremoveshavingsfrominsideofpanel.

Fig. 93
Fig. 91
Step 3: Apply Spray Paint To Cut Areas
 1. Usingapieceofcardboardasamask,applythe1
st
coatof 
 Fortresszincbasedtouch-uppaint.
 2. Allowtodrybeforeapplyingsecondcoat.
 3. Applythe2ndcoatofFortresszincbasedtouch-uppaint.
 4. Allowtodryandinstall.
Fig. 90
Markonrailin
linewiththe
backofbracket
Posioninside
boomof
cupushwith
boomface
ofrail