Instructions / Assembly

49
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
INSTALLATION: Al
13
PLUS RAILING ACCESSORIES
Step 1: Install Post Base Cover
 1. Separatethetwo-piecebaseplatecover.Holdoneside 
 paralleltothepostbaseplate.AsshowninFig.96.
 2. Place2ndhalfofthepostbasecoverontheoppositeside 
 ofthepost.Hold2ndpieceslightlyunderthe1stpiece.As
 showninFig.97.
3. Twistthe2ndcover¼turnandmovepieceunlboth 
 halvestouch.AsshowninFig.98.
 4. Makesureoneofthelockingpinsonthe2ndcoverengage
 withtheproperslotonthe1stcoverpiece.Asshownin 
 Fig.99.
 5. Oncetherstlockingpinisstarted,turnthe2ndcover 
 piecebackparalleltothepostbaseplate.Oneyouhave
  conrmedbothlockingpinshaveengagedwiththe
  opposingslotslowerbothhalvesoverthepostbaseplate.
AsshowninFig.100.
Fig. 96 Fig. 97
PostBaseCover
FlatPyramid/BallCap
BracketCap