Installation Guide

52
Fig. 112
8” [203mm] Stair Tray Strap
48” [1219mm] cut Joist
Step 4:
1. Reference X1, X2 and X3 measurements in stair calculator.
  Fig. 113 & 114.
2. Cut Joist to X3 length.
  
the cut Joist.
4. Cut Joist at X1 cut mark.
  
the cut Joist.
6. DO NOT 
cut during a later step.
Note:
• 
  r results.
• X1 end of Joist is mounted onto deck framing. X2 end of
 
Fig. 113
