Installation Guide

17
DECK & STAIR KIT INSTALLATION: APEX DECKING & Al
13
PLUS RAILING
INSTALLATION: INFILL DECK BOARDS
Free-standingDeckInstallaon
AachedDeckInstallaon
Step 1: 
 1. Measureopeningbetweeninternalfacesofthetwoside
  PictureFramedeckboards.AsshowninFig.12.Besure
  toaccountforrequiredgappingbetweenendsofInll
  BoardsandsideofPictureFrameboards.Gappingis
  temperaturedependent.ReferenceEnd-To-EndandBu 
 Jointsrowoftable1onpage5.
 2. CutGroovedDeckBoardstodeterminedLength.Asshown
 inFig.13.
Note:
• Cutlengthsaresettosquareframe.
• UseaWoodCungMiterSawtocutboards.
• Itisrecommendedtowearadustmaskwhencung.
Fig.12
Top View
Measureopening.Besuretoaccountforrequiredgappingbetween
endsofInllBoardsandsideofPictureFrameboards