User's Manual

I. Mounting the car holder
Attention! Only fix the holder for the navigation system
to the windscreen, if it does not impede the view. Should this
not be possible, then mount the holder with the enclosed
suction plate in any way that will allow peril-free and safe
operation.
Note:Your navigation system can also be equipped alternatively
with a flexible swan-neck car mounting according to the version.
Note: If you want to fix the holder to the windscreen, then you can
skip steps 1 and 2.
1 Remove the protective foil from the sticky side of the suction
plate.
2 Fix the suction plate to a suitable location on the dashboard.
Take care, that the surface of the dashboard is clean and press the
suction plate strongly onto the surface.