User's Manual

Note: To obtain a strong and secure hold the suction
plate should not be used for 24 hours.
II. FIXING THE SUCTION PLATE
Note: Clean the disk thoroughly with a glass cleaner.
Warm the disk and the nipple slightly at temperatures below
15 C.
Place the holder with the suction head onto the suction plate (or
directly onto the wind screen) and press the lever on the suction
head downwards. The sucker will attach itself to the background
firmly.
III. ATTACH NAVIGATION SYSTEM
1 Connect the car adapter and, if necessary, the external GPS
aerial, to your navigation system and insert the memory card.
2 Position the support on the attachment holes on the back of
the device.
3 After you have put the device on the support, push the
navigation system downwards until it locks into place audibly.
4 Now you will be able to place the complete unit on the cleaned
windscreen or the suction plate