User's Manual

III. Installing the Navigation software
You will be requested to install the Navigation Software during the
initial installation. Please proceed as follows:
1 Carefully take the memory card out of its packing. Take care
not to touch or dirty the contacts.
2 Push the memory card carefully into the SD-/MMC card bay
until it slightly lock in place.
3. Click OK to install the application. The memory card must
always be inserted in the device while the navigation system is being
used. It will be necessary to carry out a Soft Reset to restart the
navigation system if the memory card
has been removed, only for a short time, while the system was being
used. The main screen, through which you will be able to make the
navigation settings, will appear after all the data has been copied to
your navigation system.