User's Manual

=>
Satellite Distribution
The two circle of above half screen is satellite distribution. There are two
circles of the graph; the big one indicates horizon and the other indicates to turn
upward 45 degree. The center indicates zenith, such as ninety degree of elevation.
There is an “N” in the big circle side; it indicates the North. There are several
squares of the big circle; they indicate satellites. The inner number of squares
is satellite serial number. The low part of the screen is satellite single intensity
display. The left value indicates satellite serial number. Right value indicates
satellite intensity.
Attention item:
1. After turn on the machine, if satellites gather in “N” indicate unlock. You
must wait until “2D” or “3D” on the up right screen.
2. Sometimes you may find satellite distribution amount is different from
satellite intensity for over two satellites location are near, so it overlap.
Therefore, satellite distribution amount is usually less than satellite intensity.
(2) Position, time and height display at present.
In the main function, pushing option to “ Position”, then pushing select, the screen
will change.
The function let user know their location, height, time and satellite lock
situation.