User Manual

Installation Instruction

1.Slide open the battery cover then place the battery into the battery

compartment properly.

2.Slide the battery case back on and use the screwdriver to make

sure the case will not be removable.

Caution: Please do not use any battery other than Slim

Bluetooth GPS original battery.

Bluetooth connection

1.Switch on the Slim BTGPS.

2.Turn on your PDA device.

3.Go to Bluetooth Manager on PDA device.

4.Select Search for BT devices.

5.After found the Slim BTGPS then Select and Save it.

6.Go to Action and select SPP slave.

7.Enter the pass key 0000 if required.

8.Click on the Slim BTGPS icon and then a 2 way arrow

shows the Bluetooth is linking.

9.The Slim Bluetooth GPS LED light should be on and it means

the Bluetooth link has been established.

10.Start your navigation software application.

11.Please select the Baud rate at NMEA 38400 and proper com-port.