Assembly Instruction

⑤
Power On / Off
1. Connect the power adapter with the DC port (please make sure you use the original adapter supplied). You
will hear "Power on" from the speaker. The speaker will automatically enter Bluetooth mode as default, and
you will hear "Bluetooth, waiting for connection".
2. Press and hold the [
] button to turn the unit off. You will hear "Power off".
3. Press and hold the [
] button to turn the unit back on.
AUX Auto Switch (LED indicator: the left LED light)
1. Insert the AUX cable into the AUX socket on the rear panel. The speaker will switch to AUX mode
automatically. The green LED light will be on. The Bluetooth mode will be switched off.
2. After taking out the AUX cable, the Bluetooth mode will be switched back on automatically. You will hear the
command "Bluetooth, waiting for connection" or "Bluetooth" .
Bluetooth Connection and Play (LED indicator: the left LED light)
1. With the power on and the unit in Bluetooth mode, it will automatically switch to pairing state. The blue LED
light will flash slowly. The Bluetooth device name is ‘KBBM Side Table’.
2. A phone or other device can now be paired with the unit.
3. You will hear "Bluetooth is Connected" after pairing. The blue LED light will become constant. If pairing
fails, the blue LED light will flash quickly.
4. During music playback, the music can be paused by short pressing the
【
】
button. It will play again after a
further short press of the
【
】
button.
5. When this unit is connected to a smart phone, press and hold the
【
】
button to switch off the Bluetooth
connection. You will hear " Bluetooth disconnected, waiting for connection".
6. Another device can be connected by repeating paring with Kobe. It is not possible to have two devices
connected simultaneously.
7. The best distance between smart phone and speaker is ≤ 32.8 feet.