Instructions

3
1.4 Physical Description
Front panel Rear panel
Front panel:
 LENS: Fixed focus lens. .
 Microphone: Built-in microphone.
 Micro SD Card slot: Supports up to 128GB SD card for storing the video.
 Magnetic Bracket: Adsorbing on a ferromagnetic object using a magnet on the base
Rear panel:
 Power Light: If the power supply works fine, the light will be on.
 LAN: 10/100 Mbps RJ-45 port for wired connection
 WPS/Reset
 WPS: Push both WPS/Reset button on the camera and wireless router within 1 minute, the
camera will connect to the wireless router automatically, in WPS process, the Network light will
blink every 0.4 seconds;
 Reset: Push and hold the WPS/Reset button for more than 10 seconds to set the camera to
factory default, the Power light will blink every 0.4 seconds;
 Power: DC 5V/1A Power supply.
The flashing status of the Power/Network light are shown in the following table.
Flashing Status
Description
Flashing(red) every 0.4 seconds
Reset to take effect
Constant Flash(green)
Wired connection
Slow Flash(green) every 1.0 second
Wi-Fi connected
Flashing every(green) 0.4 seconds
WPS is connecting
Flashing every(green) 0.2 seconds
EZLink takes effect