Operation Manual

www

.foscam.co

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable.

Never shut down the power of the camera until the IP camera is able to connect to the wireless network.

The LAN IP address will disappear on the window of IP Camera Tool when the camera is configuring a wireless

connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of the

camera will show again on the window of the IP Camera Tool. The IP address may have changed after the

camera receives a wireless connection; we recommend setting a static local IP address if this IP address

changes by right clicking the camera in IP Camera Tools, setting a static IP, and pushing OK .

Congratulations! You have set up the wireless connection of the camera successfully.

NOTE :

If you fail to make a wireless connection, please refer to your seller or contact us directly for

assistance.

4.4.3 PPPoE

FI9803P does not support PPPoE connection.

If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE

account.

Figure 4.24

4.4.4 DDNS

FOSCAM camera has embedded a unique DDNS domain name when producing, and you can directly use the

domain name, you can also use the third party domain name.

FOSCAM domain name

Here take cp4911.myfoscam.org for example. Go to option of DDNS on the Settings->Network panel, you

can see the domain name.