Operation Manual

www

.foscam.com

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

this means that the camera’s HTTP port is 88. You can change port 88 to another port if you’d like such as 2000 or 8090,

which will not be conflict with other existing ports like 25, 21,10000.Here you can set the port no. between 1 and 65535.

Change the default http no.88 to another one.

How to assign a different HTTP Port No. and fixed the LAN IP of the camera by the

IP Camera Tool

？

Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on the IP address,

and click on ”Network Configuration”, this brings up the network configuration box as shown in Figure 2.8 and 2.9.

Figure 2.8

Figure 2.9

Step 2: Enter the username and password of the Administrator (default username is admin with a blank password), and

click “OK” to apply changes.

Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it was