Operation Manual

WWW.FOSCAM.COM FI9820W User Manual
2.4 For Operator
If you click here, the camera will horizontally & vertically rotate
and stop at the center
Figure 2.22
1 Click this icon, camera will rotate up
2 Click this icon, camera will rotate down
3 Click this icon, camera will rotate left
4 Click this icon, camera will rotate right
: Click this icon; camera will rotate up and down. Click to stop.
: Click this icon; camera will rotate left and right. Click to stop.
Preset: You can create preset positions for the camera to go to directly from one position to
another. A total of 8 preset positions can be configured.
Pls follow the steps below to create preset positions:
1 Adjust the shooting area to a desired position.
2 Click set 1 to define your home position.
3 To add additional preset positions, pls repeat step1-2.
When the camera rotates to other position, only choose the preset num you have set and click go,
the camera will go to the desired position.
If you want to delete one position, only reset the num.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
19