Operation Manual

WWW.FOSCAM.COM FI9820W User Manual
Set the same subnet
mask and gateway of
your camera with your
PC
There are two DNS servers, you can set the
same for your camera. Same with gateway is
also OK.
Figure 3.6
If you don’t know the DNS server, you can use the same settings as the default Gateway.
HTTP Port number:, The HTTP Port can be used to access the IPCAM on the LAN. Usually, it is
80. You can set any number between 1024 and 49151 too.
After all settings, click Apply. You will see the following picture, click OK, and re-connect the
camera.
Figure 3.7
RTSP port number: Usually, it is 554. You can set any number between 1024 and 49151 too.
Click Apply and the camera will reboot.
Enter rtsp:// IP:RTSP port number/11 or rtsp:// IP:RTSP port number/12 into the VLC, you can
see the real-time preview. WAN IP or LAN IP is OK. If the RTSP port number is 554, you can
directly enter the following url: rtsp:// IP/11 or rtsp://IP/12 . The number “11” shows that you will
use first stream. The number”12” shows that you will use second stream. For example:
Enter
rtsp://192.168.11.169/11 in the VLC.
RTSP Permission Checksum
On: Select it and you need to enter the login username and password when you view the
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
27