Operation Manual

WWW.FOSCAM.COM FI9820W User Manual
2
1 Enter SMTP server for sender
3 Select On and fill in the
authentication for sender
4 Mailbox for sender must support SMTP
5 Mailbox for receiver need not support
SMTP, you can set 3 recipients
6 Set the subject and text for the email
7
Figure 3.13
Make sure your mailbox for sender supports SMTP. Three recipients can be added to receive
images. SMTP port is usually set as 25. If SMTP server supports SSI, you should choose it. The
subject and message can not be Chinese characters.
3.7 FTP Settings
If you want to upload images to your FTP server, you can set FTP Settings.
Figure 3.14
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
31