Operation Manual

WWW.FOSCAM.COM FI9820W User Manual
Figure 3.15
Server Address: If your FTP server is set up in LAN, you can set as Figure 3.14
If you have a FTP server which you can access on the internet, you can set as Figure 3.15
FTP Port: Usually the port is 21.
User Name: Enter the login name of the FTP account.
Password：Enter the password of the FTP account.
Passive Mode: If the FTP server mode is passive, choose on, or else, choose off.
Path: The path of FTP that you plan to store images.
Click Apply after settings.
3.8 Auto Capture
The camera will capture pictures automatically at interval time if you have set Auto Capture.
Figure 3.16
Snap interval: Set snap interval time. The pictures will be stored to the disk you have set (you
can set the storage path under “For Visitor”).
Send E-mail: Select it, the camera will send email to you with the picture it has captured,make
sure you have set Email correctly..
Save Picture on the SD card: Select it and the snapped pictures will be stored to the SD Card.
Make sure the camera has plugged in the SD card.
Click Apply after settings.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
32