Operation Manual

WWW.FOSCAM.COM FI9820W User Manual
Figure 3.20
Note:1 If you select QVGA as the resolution, the camera cannot alarm anytime even when there
is something moving.
2 If you add the date&time to the video,don’t put the detection window on the time area or else
the camera will alarm when the time change.
3 If you have not set the motion detection area,the camera will not alarm at any time.
4 Firefox, Google chrome and Safari doesn’t have this function because the activex doesn’t
support it.
3.10 Alarm
Set alarm and It will send email or upload images/videos when motion has been detected.
Figure 3.21
Email Alarm: Select it and camera will send emails when motion is activated. Make sure you
have set Email Settings first.
Save Video on the FTP Server: To upload videos to an FTP server when motion is detected.
The camera must have plugged SD card,or else you cannot save videos to FTP server because
the camera will save videos to SD card first and then the videos on the SD card will be loaded up
to FTP server.
Save Picture on the FTP Server: To upload pictures to FTP server when motion is detected.
Save Picture on the SD Card: Save pictures on the SD card when motion is detected. Make
sure the camera has plugged in the SD card.
Save Video on the SD card: Save videos on the SD card when motion is detected. Make sure
the camera has plugged in the SD card.
3.11 Schedule
If you want the camera alarm during the time you wish, or all the time, please choose Schedule
and set time range for motion alarm.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
35